Installing a rainwater tanks in Queensland requires that buyers meet with certain regulations and responsibilities outlined by local authorities. The aim of these rules and regulations is to keep people safe; this includes those that are going to be using the collected rainwater, as well as the people who are living in the immediate area. Buyers should keep in mind that it is their responsibility to ensure they keep updated concerning the relevant rules and regulations outlined by their local council, as well as any other authority on the matter.

The Prevention of Mosquito Breeding

One of the main regulations outlined by local councils regarding the installation of rain water tanks is that tank owners take precautionary measures to ensure it doesn’t promote the breeding of mosquitoes in the area. People should keep in mind that local councils can send out investigators to make sure that they are following the correct procedures. It is generally up to the manufacturers to install mosquito proofing on the tanks that they choose to sell to the public, but if they fail with regards to this, clients should take the appropriate action to have the situation amended as quickly as possible.

Inspecting the Openings

According to local regulation, home and business owners are responsible for ensuring that their rainwater tanks meet with local regulation, and this includes checking that the openings are properly maintained. Any opening to a rainwater tank not only needs to have a mosquito-proof screen attached to it, but they should also be manufactured to prevent corrosion, among other requirements.

The Use of Lead

As it is stated by the Public Health Act 2005a, tank manufacturers cannot use lead, either in part or as a whole in any machinery used to collect or store water. Home and business owners are advised to inspect their rain water tanks for lead parts; if they locate any, they need to properly dispose of the tank and the collected water to ensure that it doesn’t affect further supplies.

Renting Out a Property

The local council stipulates that once a property is being rented out, owners of the building need to comply with local regulations concerning rainwater tanks right from the start of the occupancy. There are certain maintenance tasks that fall into the jurisdiction of the tenants, however, although they can find out a bit more about their roles and responsibilities by contacting the Rental Tenancy Authority.

Building Codes

In terms of having a rain water tank installed, buyers need to make sure that they are aware of and follow the Building Code of Australia, as well as the Queensland Development Code. It should be noted that owners cannot connect their water service pipe to the water storage tank until they have submitted a request and receive approval from the local authorities on the matter. In the event that the local government approves the request, purchasers will then need to make sure that they have backflow devices fitted to remain in line with local regulation.

Communicating with the Local Council

It is helpful for people to communicate with their local council as they go about determining their roles and responsibilities regarding the installation and management of rainwater tanks in Queensland. Keep in mind that the appropriate specialists in rainwater tank installation should be able to guide their clients in the right direction regarding the regulations that need to be followed, but in the end it is up to each individual to ensure these rules are correct and up to date.

With more and more people turning to rainwater tanks to limit their reliance on governmental utilities, as well as benefit in a wide variety of ways from this eco-friendly endeavor, it is important for tank owners to educate themselves about how to install and manage their systems safely and securely.

Quality Tanks is a family owned business that was established back in 1973. As Queensland’s premier rain water tank manufacturer, they also specialise in sewage treatment systems.